Strona 1 PROJECT PLANS BEAR MOUNTAIN BUILDS Cedar Planter Box Hey! Free Plans! All I’m asking is that you SUBSCRIBE to my Bear Mountain Builds YouTube Channel Here’s the link: Thanks for your support! LINK TO VIDEO: 1 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 2 MATERIALS 7 - Cedar Fence Picket - 72” x 5-1/2” x 1/2” 1 - 2x2 - 1-1/2” x 1-1/2” x 96” Also: Brad nails, indoor/outdoor glue 2 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 3 PART DIMENSIONS Parts from Cedar Fence Picket Short Side Panels 6 total - 16” x 5-1/2” Long Side Panels 6 total - 17” x 5-1/2” Bottom Support 4 total - 13“ x 1” Bottom Panels 3 total - 16” x 5-1/2” Corner Cap Thin 4 total - 17-1/2” x 2-1/2” Corner Cap Wide 4 total - 17-1/2” x 3” Top Frame 4 total - 19-5/8” x 3-1/4” Parts from 2x2 Legs 4 total - 17-1/2” x 1-1/2” 3 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 4 CUT PLAN Cedar Fence Pickets and 2x2 4 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 5 DIMENSIONS 19-5/8” 19-5/8” 18” 18” 18” 19-5/8” 19-5/8” 5 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 6 STEP 1 ASSEMBLE SHORT BOARDS Attach the 16” cedar boards to the 2 x 2s using glue and brad nails. It’s important these first two sides are square. If you’re planning on moving the planters often...consider using 1-1/2” deck screws. You’ll want to pre-drill the holes to avoid spliting the wood. If so, also make sure the screw heads are flush with the surface. So the corner pieces will lay flat. 6 © 2022 Copyright Bear Mountain Builds, LLC Strona 7 Apply wood glue Clamp together horizontally and vertically. Use braces to press boards flat. STEP 2 ASSEMBLE LONG BOARDS ww.bearmountainbuilds.com 7 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 8 STEP 3 ADD BOTTOM SUPPORTS I placed the supports at the bottom with plans for a one larger plant. You could also place the supports higher and go with a number of smaller plants. 8 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 9 STEP 4 BOTTOM OF BOX Make sure your cedar is dry when you cut the center bottom piece. If it isn’t it will shrink a bit an your boards will have gaps. 9 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 10 STEP 5 ATTACHING 2-1/2” CORNER CAP Be generous with your glue. If you’re planning on using this outside on a deck or patio, make sure you use an indoor/outdoor glue. There are lots of good choices out there. 10 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 11 STEP 6 ATTACHING 3” CORNER CAP 11 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com Strona 12 BEAR MOUNTAIN BUILDS YOU’RE DONE LINK TO MORE OF MY VIDEOS: www.bearmountainbuilds.com LINKS TO PRODUCTS USED IN THIS VIDEO: https://www.youtube.com/watch?v=1EKhvRxo6dU&t=1s 12 © 2022 Copyright Bear Mountain Builds, LLC www.bearmountainbuilds.com